Rust Bullet Warranty

Rust Bullet, LLC warrants its products to be free from material defects.

Rust Bullet® is manufactured under the strict formula specifications that were established in its extensive scientific studies. Any application or procedure which is different from the Rust Bullet guidelines that were used and proven in these studies will render Rust Bullet ineffective, as set forth below.

10 YEAR LIMITED WARRANTY 
Rust Bullet's Warranty Program is in effect subject to the limits stated below. The warranty is limited specifically to the refinished area to which the Rust Bullet® Standard or Rust Bullet® Automotive Formulas are applied.

The Rust Bullet Warranty requires the minimum coverage be a finished dry film thickness (DFT) of six (6) mils (150 microns). For industrial or marine applications, repeated coatings of Rust Bullet to be not less than a finished dry film thickness (DFT) of twelve (12) mils (300 microns) are required for the warranty to apply.

Inspection of the application method and electronic inspection with a mil gauge may be performed by Rust Bullet, at its option, for warranty verification.

Preparation includes removal of all large debris and loose scale with a wire brush, by machine, or other approved methods.

The Rust Bullet Warranty is void when an area covered is previously compromised by penetration. While prepping and re-coating may prove satisfactory, such applications are beyond the scope of this warranty.

The Rust Bullet Warranty is void when an area previously covered is later compromised by penetration through the Rust Bullet coating; however, prepping and re-coating per manufacturer's recommendations in the compromised area will reactivate the original warranty.

This warranty is to the original purchaser only, and excludes product damage due to application error, product abuse, or product misuse.

The Rust Bullet Warranty is void if the product is reduced, thinned, diluted or altered without prior written permission from Rust Bullet.

Rust Bullet preserves, at its option, the right to replace any Product which does not conform to the warranty or, in the alternative, to refund the Products' purchase price.

WE DO NOT ACCEPT LIABILITY BEYOND THE REMEDIES PROVIDED FOR IN THIS LIMITED WARRANTY OR FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES, INCLUDING, WITHOUT LIMITATION, ANY LIABILITY FOR THIRD-PARTY CLAIMS AGAINST YOU. UNDER NO CIRCUMSTANCES WILL OUR LIABILITY BE MORE THAN THE AMOUNT PAID FOR THE PRODUCT WHICH IS THE SUBJECT OF A CLAIM.

This warranty is given in lieu of all other warranties, express or implied. Implied warranties, including without limitation, the implied warranties of merchantability and fitness for a particular purpose, apply only if specifically required by law, and then only to the minimum extent required by such laws. Otherwise, all other warranties are specifically excluded.

This warranty gives you specific legal rights and you may also have other rights which may vary from state to state. At the time of any inspection, if it is found that preparation or application procedures, or the use of the product were not in strict accordance with normal uses and instructions, the warranty is void.

Rust Bullet Company and Product information and data are subject to change without notice. Please contact Rust Bullet, LLC or your Rust Bullet Representative for current and updated information.

Rust Bullet® is a Registered Trademark and has been awarded two United States Patents.