SUPERIOR PATENTED NEW TECHNOLOGY
RUST INHIBITIVE COATING
RUST BULLET LTD.
RUST PAINTS AND ACCESSORIES CATALOGUE
“Rust Bullet Industrial” rust treatment paint coating
“Rust Bullet Automotive” car rust treatment paint and metal primer
“Rust Bullet BlackShell Gloss”, rust treatment paint and anti-rust protection coating
“Rust Bullet WhiteShell Gloss”, anti-rust treatment industrial rust paint coating
“Rust Bullet Accelerant Rapid Fire”
Rust Converter Primer Rust Treatment Corrosion Protection RustFormulaX
RUST BULLET RUST PAINT, HOW IT WORKS TO STOP RUST AND PREVENT CORRISION.
How Rust Bullet® Coating Works
Rust has historically been known as “the cancer of iron and steel” and yet, only short-term fixes have been available. To amplify the problem, the application of these “short-term” temporary products requires the removal of existing rust, and/or extensive, time consuming, and often complicated preparation of the surface before applying the “temporary fix.”
It has long been a truism that painting over rust is worse than leaving the rusty surface uncoated. This is because most paints or coatings form a film over the rust, forming a barrier. This barrier traps moisture, the enemy of iron and steel, against the metal surface allowing continued destruction of the metal underneath.
Rust Bullet® is not a paint in the ordinary sense of the word. Rust Bullet® requires no preparation, except the removal of large flakes of loose rust by light scraping or brushing. When applied, Rust Bullet® does not form a film immediately, but rather it penetrates the porous rust reaching the metal underneath. Our exclusive method of protection* dehydrates, or dries out the rust by a chemical activity, allowing the resin to solidify into a tough coating with phenomenal adhesion. The rust becomes intertwined in the resin matrix and remains a permanent part of the coating. The second coat of Rust Bullet® fills any pinholes in the first coat and forms a nearly impenetrable coating that protects the metal. The exclusive method for excellent UV resistance* adds to the protection, and although it requires no topcoat, any conventional paint can be applied over the second coat for decorative purposes. Rust Bullet® has by far the best abrasion resistance of any of the tested products, and is therefore quite difficult to scratch. If a scratch or chip in the coating does occur, it will rust in the breached area because it cannot protect what it does not coat, but rust will not proceed beyond the breach. Rust Bullet® will not lift, blister, or peel away from its leading edge in any significant degree. Simply reapplying Rust Bullet® over the scratch or chip reseals the coating, providing easy, low cost maintenance.
* PATENTED NEW TECHNOLOGY